The G4 Titanium DVI 667/800 and the G4 Titanium 867MHz/1GHz full install sets. With regards to replacing the ROM file by using a more recent version of the ROM file which would have come with the Ti-book.įortunately since that post, we now have the full original install sets for the following Ti models: Perhaps with the G4 Titanium Book, it’s necessary to follow the hints in the post down below, made by “Doodle D Day” back in November, 2014. I have had trouble with system sleep with mine… New by MikeTomTom - 2020, May 25 - 3:36pm If anybody DL's this and successfully installs it to a PPC Mac, or clone, please post which model Macintosh, so it can be added to the list of Macs above that this CD is confirmed to install to. G4 Mirrored Drive Doors (2003) 1.25GHz FireWire 400.G4 eMac ATI 8x combo (M8950LL/A) 1.0GHz.G4 AGP Sawtooth (+ Sonnet 1 GHz processor card).G3 iMac (Summer 2000) 450MHz DV+ slot-loading with a G4 500MHz CPU (OC to 600MHz).G3 iMac (Summer 2000) 350MHz slot-loading, no FW/AP.G3 iBook Translucent White (mid-2002) 700MHz, 16VRAM.G3 iBook Clamshell (2000) 366MHz SE non FireWire.Power Macintosh G3 (beige tower) 300MHz.Confirmed working for these Mac PPC models:.Check for specs if you are unsure if your Mac is capable of booting to Mac OS 9.2.2 or earlier. However if the Mac cannot boot into OS 9, e.g: Macs with USB 2.0, then this CD will not be of use (as a bootable System Install CD). This will install onto most early to late model G3 & G4 Macs.

I have used this to boot up and install to a beige G3 and an eMac G4 OK. You can install Mac OS 9.2.2 from this CD onto any of the following computers: Power Mac G4, Power Macintosh G3, iMac G3, iBook G3, PowerBook G4, and PowerBook G3 (except the original PowerBook G3). DL #4: A QEMU install guide and scripting hints for installing this CD image on QEMU emulators.DL #3: Additional USB driver support for beige G3 only.If you install the Mac OS 9.2.2 that's here, onto this model eMac (possibly the eMac ATI 800MHz, also) then you should DL and use these drivers, too. This was perhaps the final production Macintosh able to boot native to a classic 9.x OS and its installed drivers were newer than whats on this universal install CD.

DL #2: These are the ATI drivers as shipped with the G4 eMac 1.0 GHz with 8x combo drive, from 2003, (M8950LL/A).

This archive has been tested as working, prior to uploading. It is OK to burn this back to CD using ImgBurn on Windows or Disk Utility on Mac OS X, or Toast on Mac OS 9/X.

DL #1: The 9.2.2 universal OS installer CD's archive is a.

Mac OS CPU Software 4.9, includes the Mac OS ROM file v9.2.1 Suitable for G3 & G4 Macintosh models capable of booting from a Classic Mac OS via CD-ROM. This is a Bootable, Universal Install CD-ROM of Mac OS 9.2.2, US English.

Mac os9 emulator